Skip to main content
OneSync is Cfx.re’s server-side sync for RedM and FiveM: the server, not the players’ PCs, keeps track of players and entities. Set it with the onesync convar: on (recommended), legacy or off. More than 32 slots needs OneSync. On FREAKHOSTING, set onesync on is already in server.cfg; change it under Server config > OneSync and set slots with Max Players in Startup.

What does OneSync do on RedM?

Without OneSync, players’ games talk to each other and the server only passes messages on. With OneSync on, the server has “full state awareness and server-determined entity routing”, as the Cfx.re server commands put it. This allows:
  • more than 32 players on one server,
  • server-side scripts that see players, horses, wagons and objects,
  • the frameworks most RedM servers use. The official VORP txAdmin recipe sets onesync to on.

OneSync on vs legacy vs off

How many players does each mode allow?

The Cfx.re documentation says sv_maxclients can be 1 to 2048. Above 32 slots, onesync must be on or legacy; above 64 slots, it must be on.

How to turn on OneSync

1

Open Server config

Open your server in the Game Panel and click Server config under FIVEM.
2

Pick a mode

Under Gameplay and security, set OneSync to On (recommended).
3

Save

Click Review and save, check the change and click Save changes. The old file is kept as server.cfg.bak.
4

Restart

Restart the server. A OneSync change only applies after a restart.
To set it by hand, open the raw file with Advanced: open the raw file and use:
Running a txAdmin recipe? It uses its own server.cfg, and txAdmin sets OneSync from the recipe. Change it in txAdmin, not on Server config. See txAdmin.

How do I get more than 32 or 48 players?

  1. Make sure OneSync is On (recommended).
  2. Make sure your plan has the slots. Max Players in Startup shows them and is read only; for more, open a ticket. The panel writes it into server.cfg as sv_maxclients at every start.
  3. Restart the server.
Cfx.re says a RedM server supports up to 48 players with OneSync for free. For more, your licence key needs an Element Club subscription from the Cfx.re Portal: Cfx.re says perks can take up to 6 hours to activate after you subscribe.

What is the RedM 32 player limit?

Two things are often called “the 32 player limit”:
  • Slots above 32 need OneSync on (see above). This one you fix yourself.
  • A RedM networking limit reported by framework makers. The VORP Core FAQ says the “32 player problem” is caused by Cfx.re and cannot be solved outside Cfx.re, and that bucket or instance scripts are not recommended as a workaround.

Frequently asked questions

Is OneSync on by default on my RedM server?

Yes. The default server.cfg has set onesync on, and Server config shows On (recommended).

Do I have to buy OneSync for RedM?

No. OneSync is free up to 48 slots. Only more than 48 slots needs an Element Club tier.

Is OneSync for FiveM the same as for RedM?

Yes. It is the same onesync convar and the same modes in FXServer.

Should I use OneSync legacy?

No, unless an old script needs it. Legacy is a compatibility mode, and above 64 slots only on works.

RedM server guide

Every RedM guide in one place.

Edit server.cfg

Every Server config setting.

Licence key

Element Club perks attach to it.

Install VORP Core

The recipe sets OneSync on.

Startup variables

Change Max Players.

Checked against the official Cfx.re server commands and RedM server hosting pages on 2 November 2026, and tested on our Game Panel (RedM, FXServer build 38055). Details may change when Cfx.re updates RedM.

Need Extra Help?

If you encounter any issues, our support team is ready to assist:

Save on Your Hosting

Ready to upgrade your hosting? Use code KB20 at checkout for 20% off your first order!

Last Updated: November 2026