Skip to main content
KF2 WebAdmin is the browser admin panel built into the Killing Floor 2 dedicated server. It is off by default. Turn on Enable WebAdmin (beta) on Startup and restart the server. Then open http://<server IP>:<Web Admin Port>/ServerAdmin and log in with the user Admin and your Admin Password.

What is KF2 WebAdmin?

WebAdmin is a small website the KF2 server runs itself. In your browser you can see the players online, kick and ban, change the map and game mode, chat with players and change settings without editing files. Changes you make there are saved into the server’s config files.

How to turn on KF2 WebAdmin

1

Open Startup

Open your server in the Game Panel and click Startup.
2

Turn on Enable WebAdmin

Switch on Enable WebAdmin (beta).
3

Check your Admin Password

Make sure Admin Password is set to a strong password. It is also your WebAdmin password.
4

Restart the server

Restart the server. The panel writes the switch and the Web Admin Port into KFGame/Config/KFWeb.ini at every start, and the console shows WebAdmin: Starting Killing Floor 2 WebAdmin....
Don’t change bEnabled or ListenPort in KFWeb.ini yourself: the panel rewrites them from Startup at every start. On a brand-new server, start it once, stop it and start it again so the game has created its config files.

How to log in to KF2 WebAdmin

1

Find the port

On Startup, note the Web Admin Port (read only). Your server’s IP is on Overview under ADDRESS.
2

Open the address

In your browser, go to http://<server IP>:<Web Admin Port>/ServerAdmin, for example http://203.0.113.10:20560/ServerAdmin.
3

Log in

Enter the user name Admin and the Admin Password from Startup.
WebAdmin uses plain http, without encryption. Use a strong, unique Admin Password, and log in only on a network you trust.

What can I do without WebAdmin?

Frequently asked questions

Why is my KF2 WebAdmin not loading?

Check that Enable WebAdmin (beta) is on and that you restarted the server after switching it on. Then check that you use http:// (not https://), the Web Admin Port from Startup and the path /ServerAdmin, and that the server is running.

What is the WebAdmin user name?

Admin. The password is the Admin Password on Startup.

Can I use port 8080 for WebAdmin?

No. Use the Web Admin Port shown on Startup. It is the port assigned to your server.

KF2 server guide

Every Killing Floor 2 page in one place.

Admin commands

Admin in game without WebAdmin.

Config files explained

KFWeb.ini and the other files.

Change the map

Start map and map cycle.

Tested by the FREAKHOSTING team on our Game Panel on 3 November 2026 (Killing Floor 2 dedicated server, version 9189). Steps may differ slightly if the game changes.

Need Extra Help?

If you encounter any issues, our support team is ready to assist:

Save on Your Hosting

Ready to upgrade your hosting? Use code KB20 at checkout for 20% off your first order!

Last Updated: November 2026